Operating With A Smartphone Or Other Terminals - Canon CS100 Mode D'emploi

Operating with a Smartphone or Other Terminals

You can use a terminal such as a smartphone, tablet, or computer to view images
stored in Connect Station or send images from the terminal to Connect Station.
Operation is performed using a dedicated application or Web browser.
To use this function, you need to connect Connect Station to an access

point, router, etc. in advance (p.16). Also, you need to connect the terminal
to the same access point, router, etc. as Connect Station in advance.
Up to five terminals can be connected at a time. However, images can only be

uploaded from one terminal at a time.
Browsers
The following operating systems and Web browsers have been confirmed to be
compatible with this device. Depending on your environment, operation may differ.
Windows 10, Windows 8.1, Windows 7: Chrome

Mac OS X 10.11/10.12: Safari (The function is not available when Private

Browsing is enabled.)
iOS (OS version 9/10): Safari (The function is not available when Private Browsing

is enabled.)
Android (OS version 4.4/5.1/6.0): Chrome

* Operation on the above operating systems and Web browsers cannot be guaranteed for all
the terminals.
* If JavaScript is disabled by the Web browser setting, images will not be displayed properly.
Dedicated application
On a smartphone or tablet, you can use the dedicated application "Connect Station"
to view, download, and upload images (p.49).
Displaying the Operation Screen on a Web Browser
Displaying by Using the NFC Function

An NFC-compatible Android smartphone or tablet (OS version 4.2 or later)
supporting Android Beam allows you to display the operation screen by using the
NFC function.
A terminal having n (N-Mark) is compatible with NFC. Note that some NFC-

compatible terminals do not have n. If you are not sure whether your terminal
supports NFC, contact its manufacturer.
Set the terminal in advance so that the NFC function can be used, and make sure

you know where the NFC antenna is located. For information on the setup
procedure, refer to the terminal's instruction manual.
Operation using the NFC function cannot be guaranteed for all the terminals. If

you cannot display the operation screen using the NFC function, see "Displaying
by Entering an IP Address" (p.43).
41