Importing Camera/Camcorder Images - Canon CS100 Mode D'emploi

Importing Camera/Camcorder Images

Import images captured with a camera/camcorder to Connect Station. When you
hold the camera/camcorder close to Connect Station, connect it with an interface
cable, or insert a card into Connect Station, the images that have not been imported
yet will be imported to Connect Station.
To import images from a smartphone, tablet, computer, etc. to Connect Station, see
"Operating with a Smartphone or Other Terminals" (p.41).
Importing Images
When importing captured images, you can select one of the following three methods.
Importing via a wireless connection
Importing from a card
Importing via a wired connection
If you change the folder name or folder structure where the images are saved, importing
images may no longer be possible.
Images recorded on the internal memory of camcorder can be imported via wired

connection.
For the power source of the camera/camcorder, using a fully charged battery or AC

adapter kit is recommended.
Image Formats That Connect Station Can Play Back

Connect Station can play back images of the formats shown below. Files of any other
formats cannot be played back even if they are imported to Connect Station.
Still photos
Movies
Images edited with a computer, etc. may not be played back with Connect Station or

playback may take time.
The remote control (except the power button) cannot be used until image playback

starts.
4K movies cannot be played back with Connect Station.

p.22
p.23
p.25
JPEG/RAW (CR2 format only)
MOV/MP4/AVCHD
(Full HD, HD, and VGA (SD) recording quality)
21