Canon CS100 Mode D'emploi page 36

Use a self-powered external hard disk with a capacity within 2 TB.

An external hard disk for copying images cannot be used for backup.

If there is a DCIM folder in a destination, the destination cannot be selected. Use a

computer or other devices to delete the DCIM folder.
Even if you perform [Delete multiple images], protected images will not be deleted.

When images are copied to a card or external hard disk from Connect Station, you

cannot import them again to Connect Station from that card or external hard disk.
If a card or external hard disk formatted with a file system other than exFAT is used, a

screen for initializing the card or external hard disk appears.
[Copy multiple images] is not available when a card is not inserted in Connect Station

or when an external hard disk is not connected to it.
If you perform [Copy multiple images] for images of 64 GB in total, it takes approx. 3

hours to complete the copying. However, depending on the operation status of
Connect Station and the conditions (size, number, etc.) of the images to be copied, it
may take 3 hours or longer to complete the copying.
To use an SDXC card or CF card that has been formatted with Connect Station for

shooting, format the card using the camera/camcorder.
34