Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GROUNDING INSTRUCTIONS
®
blenders are equipped with a 3-conductor
cordset having a molded 3-prong grounding-type plug, and should be
used in combination with a properly connected grounding-type outlet as
used with a 3-prong plug.*
grounding lug under the screw of the outlet cover plate.
licensed electrician.
Never use an adapter unless you are sure it is properly grounded.
*NOTE: Use of an adapter is not permitted in Canada.
NOTE: User-installed cord set plugs are not permitted in Europe.
MX1300XTX/MX1300XTP/MX1300XTS & MX1500XTX/MX1500XTP/MX1500XTS
BLENDER SPECIFICATIONS
MX1500XTP versions)
(30,000 RPM with Pulse)
MX1500XTS versions only
ETL
C
US
Find Quality Products Online at:
4
GlobalTestSupply
www.
turn the unit on. The blue LCD backlight will turn on and the words
After 5 seconds, the blender enters standby mode.
NOTE:
2. The motor speed can be adjusted by pressing the
buttons. Speed ranges from 15% to 100%.
100%
20,000 RPMs
50%
10,000 RPMs
15%
3,000 RPMs
The Speed Up
button will increase the motor speed display in 1%
increments and the Speed Down
scroll through speeds.
Using the Speed Up
and Speed Down
NOTE:
Stop
the blender will return to standby mode; the display will once again read
continuously at the set speed. The LCD will display the motor speed in
percentage. Default speed (percentage) is at 100%. Motor speed can be
changed while blender is running by simply pressing Speed Up
Speed Down
button.
press any of the program buttons.
PULSE FEATURES
Your unit comes equipped with two Pulse options: Normal Pulse
. Note: The Pulse buttons are momentary switches –
once released, the unit will shut off.
at 150% speed. The LCD will read MAX PULSE SPEED: 150%.
2. To use Normal pulse option, press the
3. The blender allows you to set the pulse to your desired speed. While
blending at Normal pulse speed, the motor can be adjusted. To do this,
hold the
Pulse button and press Speed Up
.com
OPERATION
button to
or
button will decrease the motor
buttons, set desired motor
button is not pressed
button. This will run the motor
button. This will run the motor
or Speed Down
5
sales@GlobalTestSupply.com
Speed
or
button or
and
Publicité
Table des Matières
