Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
RESTORING FACTORY-SET BEVERAGE STATIONS
1. To restore factory-set default beverage stations, press both
Speed Up
and Speed Down
2. Press
3. Press
button to confirm and save. The LCD will display the logo for
3 seconds.
4. The unit will return to standby mode and the LCD will prompt PRESS
NOTE: The Stop
key will abort this process at any point before
restoring default programs is confirmed.
DRINK COUNTER
Your reprogrammable blenders are equipped with a drink counter to keep
track of daily drink totals and total drink counts for your machine. To display
the counts, hold program buttons
Your display will read:
is the accumulation of all drinks made since first use of the blender.
The Daily Count can be reset by holding in program buttons
simultaneous
facility for information.
NOTE: Use of the PULSE features will not add to the daily or total drink
counts.
RESETTING THERMAL PROTECTION
motor from overheating.
its contents and allow between 5 and 30 minutes for the motor to
cool down.
discontinue use and contact a certified Waring Customer Service Center.
Find Quality Products Online at:
buttons. LCD will prompt ADD NEW
simultaneously for 3 seconds.
8
GlobalTestSupply
www.
IMPORTANT - HOT BLENDING INSTRUCTIONS
the following precautions and procedure must be observed.
air inside the container when blender is running).
desired speed.
is running.
SOUND ENCLOSURE (for MX1500XTX Version)
heavy-duty polycarbonate sound enclosure to reduce noise level while
blending. This sound enclosure is removable and dishwasher safe.
To remove the sound enclosure, follow these steps:
2. Remove front portion of sound enclosure by disengaging both sides at
the pivot point.
3. Remove rubber jar pad.
4. Remove 3 screws from blender base and remove sound enclosure.
NOTE: To replace sound enclosure, follow above steps in reverse.
TURNING OFF YOUR BLENDER
Whether your blender is in standby mode, new programming mode, or
from running and will turn the power off. The LCD display will turn off.
NOTE:
turn unit on.
CLEANING AND SANITIZING INSTRUCTIONS
will not be used again within a period of one hour.
.com
button will stop the unit
9
sales@GlobalTestSupply.com
Publicité
Table des Matières
