Fhiaba 1T Mode D'emploi page 16

5. SETTINGS AND SPECIAL FUNCTIONS
DATE
Set date
The display will show the date in the format
dd:mm:yy (day:month:year), the day will blink. Use
the Up/Down buttons
firm with Enter to go on to the next setting; once
the year is confirmed the date will be set.
How to set the date
Show date
Using this function it is possible to deactivate/acti-
vate the date visualization on the display.
How to activate the date
How to deactivate the date
TIME
Set time
The display shows the hours and minutes in the for-
mat hh:mm and with hh: blinking. Use the Up/Down
buttons to modify the setting and then confirm by
pressing Enter to go on to the next setting.
Once the minutes are confirmed, the time will be
set.
How to set the time
Set 12/24
This function selects the display at 12 or 24 h.
How to set the display to 12 h
16
to modify the setting, con-
www.fhiaba.com · info@fhiaba.com · Info Line 800-344222
How to set the display to 24 h
Show Time
Through this function it is possible to activate/de-
activate the constant visualization of the time.
How to activate the permanent time
How to deactivate
LANGUAGE
The function allows selection of the language for
the display messages.
Italian
English
French
German
Spanish
SET °C/°F
This function permits visualizing the temperature
in Centigrade or Fahrenheit degrees. Normally, the
appliance is set for visualization in centigrade de-
grees.