Fhiaba 1T Mode D'emploi page 13

the Menu
To use special functions, select the Menu button
and use the Up/Down button
menu, confirming the selection Functions.
Shopping Fridge
The function lowers the refrigerator temperatu-
re to +2°C (35.6°F) for 12 hours, permitting more
rapid cooling of food that has just been placed
in. Once the 12 hours have expired, the function
deactivates automatically, returning to the pre-
viously set temperature. It is possible to program
a timed activation of the function. After a prolon-
ged interruption of electrical current, it is neces-
sary to reactivate the function.
How to activate
How to deactivate
How to program timed activation
It is possible to program the function with a delay
of 1 to 12 hours.
The various Shopping Modes help prepare the
cooling, Fridge and TriMode compartments
for the introduction of a heat load which can
consist of fresh food or other items which
may have warmed during transport. The
more quickly an item can be cooled or frozen
the better it will be preserved.
This mode can also be effective at maintai-
ning compartment temperatures while enter-
taining when higher than average door and
drawer openings are anticipated.
Vacation Fridge
This function (recommended in case of prolonged
absences since it allows considerable energy sa-
vings) brings the TriMode compartment tempera-
ture to - 18°C (46.4°F).
It is possible to program the duration, or it can be
to access the
www.fhiaba.com · info@fhiaba.com · Info Line 800-344222
manually deactivated upon re-entry after a pe-
riod of absence.
This function remains active even if during the
period of absence there is a prolonged interrup-
tion of electrical power.
How to activate
How to deactivate upon re-entry
How to program the duration
It is possible to program a period from 1 to 90
days.
Shopping TriMode
This function must be activated at least 24 hours
before inserting room temperature items into the
freezer, or several hours before placing into the
freezer previously frozen items which have been
subject to a slight temperature rise. This function
is automatically deactivated when the program-
med time period expires. It is possible o program
timed activation of the function.
If interrupted by a prolonged interruption of the
electrical power, it is necessary to reactivate the
function.
How to activate
How to deactivate
How to program timed activation
It is possible to program the function with a delay
of 1 to 12 hours.
EN
13