Ice Maker Activation; Information And Malfunction Messages On The Display; Settings And Special Functions; Customization And Language Settings - Fhiaba 1T Mode D'emploi

In case the compartment is used as refrigerator
or Crisper-Fresco compartment (TriMode fun-
ction) the recommended and preset temperatu-
res will correspond to those indicated for the re-
spective compartments.
The temperature shown can vary slightly in
respect to the set temperature following fre-
quent openings of the doors or insertion of
room temperature foods or large quantities
of foods.
6 to 12 hours are necessary to reach the se-
lected temperature.
4.3 Ice Maker Activation (optional)
The Ice Maker button
trol panel permits activation of the automatic ice-
maker.
The button is illuminated when the icemaker is
functioning.
A prewash of the water circuit should be perfor-
med before activating the Ice Maker for the first
time. To do this touch at the same time buttons
Enter and Ice Maker
After a few minutes the Ice Maker can be activa-
ted.
For freezer models 0F
...
Important
Do not activate the Ice Maker unless
the appliance is connected to the water
mains.
4.4 Information and malfunction mes-
sages on the display
An integrated control system provides informa-
tion through light signals or text messages vi-
sualized on the display.
The information signal is always visualized with
a fixed text message, while a malfunction signal
is visualized with blinking text. The sound signal
that accompanies some malfunction signals can
be deactivated by pressing the Alarm button
12
located on the main con-
.
www.fhiaba.com · info@fhiaba.com · Info Line 800-344222

5. SETTINGS AND SPECIAL FUNCTIONS

on the main control panel.
The list of malfunction signals is located at the
back of this manual.
5.1 Customization and language set-
tings
To prevent an inadvertent change to the set-
tings the keypad is automatically locked after
a certain period of time.
To re-activate the Menu function, press simul-
taneously the Menu button
button for at least three seconds.
The key lock can be disabled through the spe-
cific function in the Settings menu.
It is possible to customized the functions of your
Fhiaba to adapt it to diverse usage needs, reset-
ting the main parameters (Settings) or activating
special functions (Functions).
Functions are visualized on the main display by
pressing the Menu button
The Up/Down buttons permit scrolling the avai-
lable functions, which can be selected by pres-
sing the Enter button
the current functioning status.
Using the Up/Down buttons , it is also possible
to scroll through the selected function, activating
or deactivating by pressing the Enter button
Once the function is confirmed, the display will
automatically visualize the main menu to select
other functions.
At any time it is possible to return to the previous
selection through the FhiabaAccess button
The language of the messages appearing on the
display can be changed by operating as follows:
Enter the Menu by pressing the Menu button
select Settings via the Up/Down buttons
confirm via Enter . Then select the Language
function and the desired language.
5.2 Special functions activated through
and the Down
.
. The display visualizes
.
and
.