Publicité
TROUBLESHOOTING
PROBLEM
CAUSE
The power supply cord is not plugged in
to the power socket.
The machine does not
turn on.
The main on/off switch "G" is positioned
on "0".
No water in the tank.
The capsule is not inserted in the capsule
compartment.
The capsule inserted does not dispense
coff ee.
The moveable part of the top of the ma-
The machine does not brew
chine is not completely closed.
coff ee.
The
or
pressed.
The water tank has not been correctly
inserted.
Internal components with scale buildup Descale the machine as described in the related paragraph.
The pump did not prime.
Water leaks out.
Incorrect type of capsule.
Machine in power save mode.
Connect the plug to a socket which complies with the technical specifi cations indicated in the data plate "M" under the
base of the machine.
Position the main on/off switch "G" on "I".
Fill tank "L" with water.
Insert a capsule in the capsule compartment "B".
Remove the capsule by disengaging and lifting the lever "A" and collect it from the capsule tray "D". Close the capsule
compartment "B" and dispense a small quantity of water. Insert the capsule again and start brewing.
Lift the lever "A" and make sure that you have inserted the capsule correctly. Lower the moving part and lock by lowering
the lever "A". Press the
buttons have not been
Touch the
or
Check that the water tank "L" is completely inserted.
Try to dispense water without inserting the capsule into the compartment "B".
Make sure that you are using an "Iperespresso" capsule for household use identifi ed by the "Ground coff ee single-dose
capsule for household use" label on the package.
Turn on the machine by tapping either
Touch the
or
SOLUTION
or
buttons to brew coff ee.
button again.
or
buttons.
button again to start brewing.
IT
EN
If problem
persists
Contact an
authorized
Service Center.
19
Publicité
Chapitres
