Drive Handy-Ox Guide D'utilisation page 25

F. charge
There are two kinds of charge methods:
a) Connect the device with computer by data line, then the device should be under charge
state.
b) Connect the device with power supply by power adaptor, then the device should be under
charge state.
c) The five status of battery power are shown as follows.
If the alarm function is on, the device will provide high priority alarm signal when the
battery is in low power status .Intermittent alarm will occur and the battery icon turns
red in the state of flashing. High priority indicating that immediate operator response
is required.
the four status above shows
dynamically in turn
Power supply by battery only, and battery status is full
Battery status is not full
Battery status is draining away
Low power alarm indication (Please charge the battery)
Battery is charging
25
English