Drive Handy-Ox Guide D'utilisation page 20

Medium priority indicating that prompt operator response is required.
When setting up operation, the operator inserts the patient's finger, and sets the spO2
ALM HI lower than the current measure value, then the machine will start alarm. the
pulse rate alarm test is the same with the above.
b. the alarm state setting
Press the "up button" or " down button", and move the menu choice bar to "Alarm", then
choose the alarm state "on/off" by pressing the "menu button". Choose "on" to start the alarm
function, and choose "off" to disable it.
b) Pulse sound indication setting
In the main menu interface, press the "up button" or "down button", and move the menu
choice bar to "Pulse Sound", then choose the pulse sound indication state "on/off" by pressing
the "menu button". Choose "on" to start the function, and choose "off" to disable it.
20
English
Figure 9