Drive Handy-Ox Guide D'utilisation page 24

d. When the uploading of stored data is finished, the device will automatically return to the
measuring interface.
f) Device ID
the user can set device iD by PC software. Please refer to <spo
details.
g) exit the main menu
In the main menu interface,press the "up button" or "down button" in order to move the menu
choice bar to"Exit", then press the "menu button" to exit the main menu.
e. Pc software operation
Please connect the device with computer by the USB data line,then double click "SpO
tant" icon to run the PC software. The functions such as uploading data and changing device
iD could be carried out by the software. Please refer to <spo
detail.
if the user choose to turn on the synchronizing display function in computer, it would probably
take several seconds for the data to appear on the computer screen.(If there is no data on the
computer screen, unplug USB data line, then repeat step "E" again.)
24
English
Figure 13
assistant user manual> for
2
assistant user manual> for
2
assis-
2