Drive Handy-Ox Guide D'utilisation page 23

f. if turning on the data storage function, the old data will be automatically removed.
g. in the state of data storing, after the screen is automatically shut down, the pulse sound
indication would be off for saving power.
h. When the storage space is full, it displays "Memory is full" on the screen, and then shut
down in a few seconds. But it will still display "Memory is full" the next time you power on
the device. If pressing any button (power on/off excluded) again, it will enter the measure
interface.
e) stored data transmission setting
a. Connect the device to computer with data line, then open the PC software. Please refer
to <spo assistant user manual> for detailed operation method of uploading data. the
2
software symbol is as figure 12.
the computer the device is connected to should accord to the standard of Iec60950,
and the system which is composed with the device accord with the requirements of
Iec60601-1-1.
b. in the state of storing, it is not applicable for the users to upload the stored data to computer.
c. When the stored data is being uploaded, the screen displays as figure 13.
Figure 12
software symbol
23
English