Table Des Matières; Introduction; Product Description; Intended Use - Husqvarna LB 548i Manuel D'utilisation

Introduction................................................................... 10
Safety............................................................................12
Assembly...................................................................... 19
Operation...................................................................... 20
Maintenance................................................................. 22

Product description

The product is a pedestrian-controlled rotary lawn
mower. The model LB 548i uses BioClip to cut the grass
into fertilizer.
The model LC 551iV collects the grass in a grass
catcher. Remove the grass catcher to get rear discharge

Product overview

(Fig. 1)
1. Control panel
2. Motor brake handle
3. Start inhibitor
4. Grass catcher (LC 551iV)
5. Rear cover(LC 551iV)
6. Safety key
7. Handle knob (LC 551iV)
8. Handle adjustment lever (LB 548i)
9. Battery cover
10. Cutting height control (LC 551iV)
11. ON/OFF button
12. SavE button
13. SavE indicator
14. Battery indicator
15. Speed level indicator
16. Decrease speed button
17. Increase speed button
18. Error LED
19. Cutting cover
20. Air intakes
21. Rating plate
22. Drive bail (LC 551iV)
23. Battery charger (Accessory)
24. Battery (Accessory)
25. Multi battery (Accessory)
26. Adapter plate (Accessory)
27. Multi battery adapter (Accessory)
28. Operator's manual
10
Contents
Troubleshooting............................................................ 24
Transportation, storage and disposal........................... 25
Technical data.............................................................. 26
EC Declaration of Conformity....................................... 28

Introduction

of the grass. Attach a mulch kit (accessory) to cut the
grass into fertilizer.

Intended use

Use the product to cut grass in private gardens. Do not
use the product for other tasks.
Symbols on the product
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
WARNING: This product
can be dangerous and
cause serious injury or
death to the operator or
others. Be careful and
use the product correctly.
Read the operator's
manual carefully and
make sure that you
understand the
instructions before you
use this product.
Keep persons and
animals at a safe distance
from the work area.
Look out for thrown
objects and ricochets.
1336 - 003 - 17.12.2019