Fitting; Mechanical Installation - Festo ZSB-1/8 Notice D'utilisation

ZSB−1/8
Use the product in its original state.
S
Unauthorized modification is not permitted.
The individual components are fixed with
screw locking agent (Fig. 4).
5

Fitting

Mechanical installation

1. Place the product so that filter 4 for the breathing opening is not covered.
2. Fasten the product with two M5 x nn screws in the through holes 6 or with
two M6 x nn screws via the fastening thread.
3. Install two 3/2−way push−button valves as per Fig. 3.
Warning
Any attempt to actuate the push−button
valves with only one hand or with an elbow,
a knee or a foot will impede the safety
function (Fig. 5).
S Make sure that the specifications
required for setting up two−hand
push−button switching circuits as per
DIN EN 574 and DIN EN 954−1 are
observed.
S If necessary, take into account existing
C−standards for your type of machine.
S Implement the measures as per
DIN EN 574.
Festo ZSB−1/8 0701NH English
Ô Ô Ô Ô Ô Ô Ô Ô
Ô Ô Ô Ô Ô Ô Ô Ô
Ô Ô Ô Ô Ô Ô Ô Ô
Ô Ô Ô Ô Ô Ô Ô Ô
Fig. 4
Ô Ô Ô
Fig. 5
17