Remote Control - LENCO DAR-015 Mode D'emploi

Remote Control

1. Standby button
2. Vol+ button
3. Alarm button
4. Previous button
5. Scan button
6. Mute button
7. Preset button
8. OK button
9. Next button
10. Vol- button
11. Preset numbers
12. Snooze button
13. Stereo button
14. Menu button
15. Sleep button
16. Preset shift button
17. Mode button
Instructions
Basic operations
Switch on your radio for the first time
Connect the radio with Power Adaptor provided.
Plug the other end into power socket.
Switch the ON/OFF switch to ON position, the unit will display "Welcome to digital Radio".
Press the Standby button to turn on.
Selecting the modes
When the radio is turned on, press the Mode button repeatedly to switch between DAB+ and FM
modes.
DAB+ operation
When you first select DAB+ radio, press Scan button it will search for and store all available DAB+
stations. Once Auto search is completed, your radio will select the first station tuned.
Selecting between stations. With your radio on:
Press the Mode button to select DAB+ mode.
Press the Prev or Next button to navigate through the list of stations.
Press Enter button to tune to the station currently shown on the display.
You may adjust volume by turning Volume to left or right.
FM operation
With your radio on, press the Mode button to select FM mode.
Press the Prev or Next button to manually tune to specific frequencies by 0.05MHz per step.
7