JVC KD-R971BT Manuel D'instructions page 27

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
Symptom
Remedy
Playback is intermittent or
Turn off the power saving mode on the Android device.
sound skips.
"CANNOT PLAY"
• Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.
No Bluetooth device is
• Search from the Bluetooth device again.
detected.
• Reset the unit. ( 3)
Pairing cannot be made.
• Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 9)
Echo or noise occurs.
• Adjust the microphone unit's position. ( 9)
• Check the [ECHO CANCEL] setting. ( 11)
Phone sound quality
• Reduce the distance between the unit and the Bluetooth
is poor.
device.
• Move the car to a place where you can get a better signal
reception.
Sound is being
• Reduce the distance between the unit and the Bluetooth
interrupted or skipped
audio player.
during playback of a
• Turn off, then turn on the unit and try to connect again.
Bluetooth audio player.
• Other Bluetooth devices might be trying to connect to
the unit.
The connected Bluetooth
• Check whether the connected Bluetooth audio player
audio player cannot be
supports Audio/Video Remote Control Profile (AVRCP).
controlled.
(Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
Symptom
Remedy
"PAIRING FULL"
The number of registered devices has reached its limit.
Retry after deleting an unnecessary device. ( 13, DELETE
PAIR)
"PLEASE WAIT"
The unit is preparing to use the Bluetooth function. If the
message does not disappear, turn off and turn on the unit,
then connect the device again.
"NOT SUPPORT"
The connected phone does not support Voice Recognition
feature.
"ERROR"
Try the operation again. If "ERROR" appears again, check if
the device supports the function you have tried.
"H/W ERROR"
Reset the unit and try the operation again. If "H/W ERROR"
appears again, consult your nearest service center.
If you still have troubles, reset the unit. ( 3)
23
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kd-r871btKd-r774btKd-r771bt

Table des Matières