Secure Dishwasher In Cabinet Opening - Whirlpool WPRERADWMW9305 Instructions D'installation

Level legs
Preferred method
44.
Check level side to side
and adjust legs if needed
Place level against top front opening of tub. Check that
dishwasher is level from side to side. If dishwasher is not
level, adjust front legs up or down until dishwasher is level.
Optional method
SECURE DISHWASHER
IN CABINET OPENING
45.
Double-check dishwasher
alignment in cabinet opening
Check that dishwasher is still level front to back and side
to side in the cabinet opening.
Open dishwasher door and place towel over pump assembly
and spray arm of dishwasher. This will keep screws from
falling into pump area when you are securing dishwasher
to countertop or cabinet.
46.
Secure dishwasher
Screw to side
cabinet
Open dishwasher door to prepare for securing the dishwasher
to the countertop or side cabinet.
NOTES:
The dishwasher must be secured to keep it from shifting
■
when the door is opened or closed.
Do not drop screws into bottom of dishwasher.
■
Locate brackets installed in the "Choose Anchor Attachment
■
Method" section, either on top or on the sides of the
dishwasher.
If countertop anchoring: Secure dishwasher to the
■
countertop with two #10 x
If side anchoring: Drill pilot holes in cabinet to avoid
■
splitting the wood. Secure dishwasher to cabinet with two
#10 x / " Phillips-head screws (included). Remove upper
1
2
rack for easier access. See the Use and Care Guide for
instructions how to remove the upper rack if needed.
/ " Phillips-head screws (included).
1
2
19