Features; Assembly - Ryobi RY9904 Manuel D'utilisation

Mainteneur de charge pour batterie
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT SPECIFICATIONS
Input ...............................................................................................................................................120 Volts, AC only, 60 Hz
Output ............................................................................................................................. 6 Volts, 1 Amp or 12 Volts, 2 Amps
KNOW YOUR BATTERY MAINTAINER
See Figures 1 - 2.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual.
Before use of this product, familiarize yourself with all oper-
ating features and safety rules.
BATTERY CHARGING CABLE
Use the battery charging cable with cover to connect 6 and
12 Volt lead acid batteries to the battery maintainer.
NOTE: Place cover onto the battery charging cable when
not in use.
FLOAT MODE
The maintainer automatically enters Float Mode when not
charging or when maintaining batteries. This allows the
maintainer to conserve energy by charging batteries only
as needed, and also protects the cells and maximizes the
life of your batteries.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.

FEATURES

ELECTRONIC FEEDBACK
LEDs and alarms provide feedback to indicate the condition
of the battery and the maintainer.
KEY HOLE HANGER
The charger has a key hole hanging feature for convenient,
space saving storage. Screws should be installed so that
the center distance is 4-1/2 in.
VOLTAGE SELECTOR SWITCH
The voltage selector switch lets the operator choose between
6 volt and 12 volt operation.

ASSEMBLY

PACKING LIST
Battery Maintainer
Battery Charging Cable
Battery Clamps (2)
Terminal Rings (2)
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
7 − English

Publicité

Table des Matières
loading

Table des Matières