Description; Control Unit; Technical Data - Weller WSL 2 Manuel D'utilisation

Masquer les pouces Voir aussi pour WSL 2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

1. Description

1.1 Control Unit

The WSD 161 / WSL 2 Soldering Station belongs to a family of equipment developed
for industrial production as well for the repair and laboratory sectors. Simple and
easy operation is made possible by the use of a microprocessor. Two different
soldering irons can be operated at the same time on two independent digital
temperature regulators. The soldering irons themselves are automatically identified
by the soldering station and assigned the appropriate control parameters. The
particularly powerful 24 V heater elements provide excellent, dynamic behaviour
making the soldering irons universal in their application.
Various possible ways of equalising potential on the soldering iron tip, a zero voltage
switch, as well as anti-static features on the control unit and soldering irons,
supplement the high standard of quality. The functional diversity of this soldering
station is further expanded by the possibility of connecting an additional input unit.
Using the optional WCB 1 and WCB 2 Input Units, timing and locking functions,
amongst others, can be realised. An integrated temperature measurement unit and
PC interface are included in the extended scope of the WCB 2 Input Unit.
The required temperature can be adjusted over the range 50°C - 450°C (150°F -
850°F) via 2 buttons (Up/Down). Target and actual value are digitally displayed by
making the appropriate selection using the channel button. Achievement of the pre-
set temperature is indicated by an LED assigned to the channel; this LED thus serves
as an optical regulator monitor. Continuous illumination means that the system is
warming up.
1.2 Soldering irons
LR 21:
Our "standard" soldering iron. With a power of 50 watts and a wide
spectrum of soldering tips (ET series) this soldering iron can be used
anywhere in the electronics sector.
MLR 21:
With its 25-watt power and slim design, this micro-soldering iron is
especially well-suited for fine soldering work with a low heating
requirement.
MPR 80:
The Weller Peritronic MPR 80 soldering iron has an adjustable
working angle of 40° to enable an individually ergonomic soldering
process. The 80-watt power and slim design makes this soldering
iron suitable for fine soldering work.
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
WTA 50:
The unsoldering tweezers WTA 50 were specially designed for
USA
GB
unsoldering SMD components. Two heating elements (2 x 25 watts),
each with its own temperature sensor, ensure constant temperatures
at both ends.
LR 82:
High-performance 80 watt soldering iron for soldering work with high
heatr equirements. The soldering tip is attached by a bayonet catch to
ensure correct position when using different tips.
WSP 80:
The soldering iron WSP 80 is characterized by its capacity for
reaching the soldering temperature quickly and precisely. Its slim
design and heating power of 80 watts makes universal usage possible
- from extremely fine to high-temperature soldering work.
Work can be continued immediately after switching soldering tips,
since the temperature is reached again quickly.
WSP 150:
Powerful 150W soldering iron for soldering work requiring extremely
high temperatures. Only one channel is active when using this
soldering iron. Extended temperature range of up to 550°C.
WMP:
Due to its handy design, the Weller WMP micro soldering iron is
suitable for work on professional SMD electronics. A short distance
between the handle and the soldering tip ensures ergonomic handling
of the 65W soldering iron when performing the finest of soldering
tasks.
See "Accessories" for additional tools.

Technical Data

Dimensions in mm:
Mains Voltage (11):
Power Consumption:
Protection Class:
Fuse (12):
Temperature Regulator:
Precision:
Potential Equalisation (8): Via a 3.5 mm jack
(not USA )
(refer to the details on type plate as well)
166 x 115 x 101 (L x B x H)
230 V / 50/60 Hz; 240/120V / 50/60 Hz; 100V / 50/60 Hz
150 W
1 (Control Unit) and 3 (Soldering Irons)
T800 mA (230 V / 50/60 Hz)
T1,6 A
(240/120 V / 50/60 Hz) (for dualvoltage version)
(120 V / 60 Hz)
(100 V / 50/60 Hz)
(5 x 20 in the power unit)
50°C - 450°C (150°F - 850°F)
± 9°C
(Initial condition - directly earthed)
24

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wsd 161

Table des Matières