Getting Started; Signal Strength - Hama RC 540 Mode D'emploi

Warning – Batteries
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a re.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow them to enter the
environment. They can contain toxic, environmentally harmful heavy metals.
• Immediately remove and dispose of dead batteries from the product.
• Avoid storing, charging or using the device in extreme temperatures and
extremely low atmospheric pressure (for example, at high altitudes).

3. Getting Started

• Open the battery compartment (12), insert two AAA batteries with the correct
polarity and close the battery compartment (12).
• If nothing is shown on the LCD display after new batteries have been inserted, press
the RESET button (9) with a pointed object to restart the device.
4. Operation
Note – Input
Hold down the
4.1 Automatic date/time setting using the DCF radio signal
• Once you have inserted the batteries, the display is switched on, an acoustic signal
sounds and the alarm clock automatically starts searching for a DCF radio signal.
During the search, the radio icon
• When the radio signal is received, the date and time are automatically set.
Radio icon
4
button (4) or the button (5) to select the values faster.
will ash. This process can take 3 to 5 minutes.

Signal strength

No reception
Poor