Table Of Specifi Cations; Technical Description - Gumotex KAJAK K1 Manuel De L'utilisateur

Owner's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching
Grade 4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with
occasional waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your fi rst individual use of the vessel so that it is safe
and comfortable. Your dealer or the National Yacht Federation or club
will recommend you appropriate training courses or qualifi ed instructors.
Do not pull off until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your vessel
and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of specifications
(Indicative values)
Length (cm)
Width (cm)
Peripheral cylinder diameter (cm)
Number of air chambers
Approximate dimensions - packed in carry bag (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Maximum weight (kg)
Maximum load (kg)
Maximum number of people
Draught (cm)
The highest anchor above surface (cm)
2. Technical description - see Figure No. 1
1. Side tube
2. Bottom
3. PUSH/PUSH valve which allows infl ation/defl ation, pre-
ssure control and measurement by pressure gauge (see
Fig. 2)
4. Relief valve
5. Screw valve for small chambers (seats, foot rests, etc.)
6. Back support
7. Support attachment
8. Fixation strap for white-water kayaking (see Detail A)
9. Fixation strap attachment
10. Foot rest
11. Foot rest attachment
KAYAK K1, KAYAK K2
0,025MPa [0,25Bar / 3,7PSI]
TABLE OF CONTENTS:
1. Table of Specifi cations
2. Technical Description
3. Infl ation Instructions
4. Using the Boat
5. Storage of the Boat
6. Treatment and Storage
7. Guarantee Conditions
8. Boat Repairs
9. Product Disposal Method
10. Packaging Disposal Method
11. Type Parameters Tag
- legend of symbols used
12. Safety Caution
K1
340
98
30
3 +1+2
70 × 45 × 28
70 × 47,5 × 35
15
100
1
15
40
12. Seat
13. Kayak carrying handle
14. Luggage strap attachment
15. Manufacturer's label
16. Yellow „WARNING" label
17. bracket for single-seat boat version (K2 kayak)
18. Rope for seat and fi xation strap attachment
19. strap lug with clasp for single-seat version (K2 kayak)
ACCESSORY SUPPLIED WITH THE KAYAK:
Transport bag, 2 compression straps for strapping the folded
boat, user's manual with the warranty certifi cate, foam sponge
in a mesh bag, strap lug with a clasp for the single-seat versi-
on in K2 kayak, repair kit containing glue, patches and valve
adaptor.
VERSION 6/2019
GB
Page 9
K2
390
100
30
3 + 2 + 3
70 × 45 × 30
72,5 × 55,5 × 32
0,025MPa [0,25Bar / 3,7PSI]
20
200
2
15
40
9
9
10
10
11
11
11
11
11
11
12
12