Table Des Matières; Table Of Specifi Cations - Gumotex PULSAR 340 Manuel De L'utilisateur

Owner's Manual
•
Design category D pursuant to Directive 2013/53/EU of the European Parliament and of the Council.
•
A watercraft given design category D is considered to be designed for a wind force up to, and including, 4 and
signifi cant wave height up to, and including, 0.3 m, with occasional waves of 0.5 m maximum height.
Design category
A
B
C
D
Watercraft in each design category must be designed and constructed to withstand the parameters in respect of
stability, buoyancy, and other relevant essential requirements listed in this Annex and to have good manoeuvrability.
•
The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category I.
•
Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your fi rst individual use of the vessel so that it is safe
and comfortable. Your dealer or the National Yacht Federation or club will
recommend you appropriate training courses or qualifi ed instructors.
Do not pull out until the expected sailing conditions (wind force and wave
height) comply with the construction category of your boat and you and
your crew are able to control the boat in such conditions.
Please keep this Guide in a safe place and hand it over to the new
owner if you sell the boat.
1. Table of Specifications
(Dimensions When Inflated)
Length (cm)
Width (cm)
Perimeter cylinder dia. (cm)
Number of air chambers
Max. operating pressure (MPa)
Max. loading capacity (kg)
Max. number of persons
NITRILON version weight (kg)
Weight of NITRILON with wear-proof CR-film (kg)
HYPALON version weight (kg)
Weight of HYPALON with wear-proof CR-film (kg)
Packed raft dimensions
No. of transverse cylinders
Application range
Float draught (cm)
Highest solid point above water level (cm)
10
PULSAR
up to, and including, 8
up to, and including, 6
up to, and including, 4
PULSAR 340
80 x 60 x 35
Wind force
(Beaufort scale)
exceeding 8
TABLE OF CONTENTS:
1. Table of Specifi cations
2. Technical Description
3. Infl ation Instructions
4. Using the the boat
5. Folding of the boat
6. Treatment and Storage
7. Guarantee Conditions
8. Boat Repairing
9. Product Disposal Method
10. Packaging Disposal Method
11. Type Parameters Tag
12. Safety Caution
PULSAR 380
340 380
165 178
42 50
5+2 5+2
0,025 [0,25 Bar, 3,7 PSI]
450 650
5 7
35 44
41 51
43 53
49 57
80 x 65 x 40
2 2
WW 4 WW 5
20 20
75 80
VERSION 11/2017
GB
Signifi cant wave height
(H ⅓, m)
exceeding 4
up to, and including, 4
up to, and including, 2
up to, and including, 0.3
PULSAR 420 PULSAR 450
420 450
190 210
53 55
5+2 5+3
800 900
8 9
50 60
58 69
60 70
68 78
85 x 65 x 40 90 x 70 x 35
2 3
WW 5 WW 5
20 20
83 87
page 10
11
11
11
11
12
12
12
12
12
12
13
PULSAR 560
560
210
56,5
5+3
920
12
75
83
88
98
100 x 70 x 50
3
WW4
20
88