User's Manual; Table Of Specifi Cations; Technical Description - Gumotex KAJAK K2 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour KAJAK K2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Owner's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching Grade
4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with occasional
waves up to 0.5 metres of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your fi rst vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenan-
ce and control prior to your fi rst individual use of the vessel so that it
is safe and comfortable. Your dealer or the National Yacht Federation
or club will recommend you appropriate training courses or qualifi ed
instructors.
Do not pull o until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your ve-
ssel and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of specifi cations
(Indicative values)
Length (cm)
Width (cm)
Peripheral cylinder diameter (cm)
Number of air chambers
Approximate dimensions - packed in carry bag (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Maximum weight (kg)
Maximum load (kg)
Maximum number of people
Draught (cm)
The highest anchor above surface (cm)
2. Technical description - see Figure No.
1 Side tube
2 Bottom
3 PUSH/PUSH valve which allows infl ation/defl ation, pre-
ssure control and measurement by pressure gauge (see
Fig. 2)
4 Relief valve
5 Screw valve for small chambers (seats, foot rests, etc.)
6 Back support
7 Support attachment
8 Fixation strap for white-water kayaking (see Detail A)
9 Fixation strap attachment
10 Foot rest
11 Foot rest attachment
KAYAK K2
TABLE OF CONTENTS:
- legend of symbols used
3 + 2 + 3
70 × 45 × 30
72,5 × 55,5 × 32
0,025 MPa [0,25 Bar / 3,7 PSI]
12 Seat
13 Kayak carrying handle
14 Luggage strap attachment
15 Manufacturer's label
16 Yellow „WARNING" label
17 Bracket for single-seat boat version
18 Rope for seat and fi xation strap attachment
19 strap lug with clasp for single-seat version
ACCESSORY SUPPLIED WITH THE KAYAK:
Transport bag, 2 compression straps for strapping the fol-
ded boat, user's manual, foam sponge in a mesh bag, strap
lug with a clasp for the single-seat version, repair kit contai-
ning glue, patches and valve adaptor, metal key for valves.
VERSION 6/2022
GB
K2
390
100
30
20
200
2
15
40
Page 9
9
10
10
11
11
11
11
11
11
12
12
9

Publicité

Table des Matières
loading

Table des Matières