Operating Time; Temperature Probe - Wolf E Série Guide D'utilisation Et D'entretien

OVEN OPERATION
Oven Operation

OPERATING TIME

The operating time feature automatically turns the oven off
at a specified time. Oven will begin to heat immediately and
will turn off at the desired switch-off time.
If the temperature probe is used, the probe will override the
switch-off time and turn the oven off when the set tempera-
ture is reached. If the probe temperature is not reached
before the switch-off time, it will not extend operating time.
Setting controls:
Select desired cooking mode and temperature.
1
Press .
2
Turn knob to select desired operating time (up to 9 hours
3
and 59 minutes), then press .
To adjust operating time, press and turn the knob to
select the desired time, then press . The automatic
switch-off time can be overridden at any point by pressing
.
DELAYED START
The delayed start feature automatically turns the oven on
and off at specified times. Oven will remain idle until the
desired start time and will turn off at the desired switch-off
time. The clock must be set to the correct time for delayed
start to function properly.
If the temperature probe is used, the probe will override the
switch-off time and turn the oven off when the set tempera-
ture is reached. If the probe temperature is not reached
before the switch-off time, it will not extend operating time.
Setting controls:
Select desired cooking mode and temperature.
1
Press and turn knob to select desired operating time
2
(up to 9 hours and 59 minutes), do not press
Press and turn knob to select desired switch-off time,
3
then press .
To adjust switch-off time, press twice and turn the knob
to select the desired time, then press . The automatic
switch-off time can be overridden at any point by pressing
.
With the clock in 12-hour mode, delayed start can be set
up to 11 hours and 59 minutes, or up to 23 hours and 59
minutes in 24-hour mode.

TEMPERATURE PROBE

Use only the temperature probe shipped with this appli-
ance. Refer to the illustration below. The temperature probe
measures the internal temperature of food while cooking. It
can be used with all cooking modes except Gourmet. The
temperature probe should not be used when oven tempera-
ture exceeds 230°C. The probe must remain a minimum of
51 mm from oven cavity surfaces. The probe must be fully
inserted to provide an accurate reading.
Setting controls:
Select desired cooking mode and temperature.
1
Place probe in the thickest part of the food being
2
cooked, then insert connector into the receptacle. Refer
to the illustration below.
.
Press (do not press ).
3
Press and turn knob to select desired doneness,
4
then press .
The probe temperature will appear on the display once it is
above 30°C.
CAUTION
Probe and probe receptacle will be very hot. Handle
with care.
Temperature probe. Probe receptacle.
Sabbath
This appliance is certified by Star-K to meet strict religious
regulations in conjunction with specific instructions found
on www.star-k.org.
Setting controls:
With oven off, press and turn knob to USER
1
SETTINGS, then press .
Turn knob to ACOUSTICAL SIGNAL, then press
2
Turn knob to OFF, then press .
3
Turn knob to ILLUMINATION, then press .
4
Turn knob to VIA BUTTON ONLY, then press
5
Press .
6
Press four times, then press . Select desired
7
temperature above 99°C, then press .
wolfappliance.com
.
.
|
7