Eu Declaration Of Conformity - WIKA MG-1 Mode D'emploi

3. Specifications
3.11 Materials
Materials
Wetted parts
Non-wetted parts

3.12 EU declaration of conformity

EMC directive, EN 61326 emission (group 1, class B) and immunity (industrial application)
■
Pressure equipment directive
■
RoHS directive
■
3.13 Dimensions in mm
with M12 x 1 circular connector
For special model numbers, e. g. MG-10000, please note the specifications stated on the delivery note.
For further specifications, see WIKA data sheet PE 81.44 and the order documentation.
When designing the system, please note that the values given (e.g. burst pressure, overpressure safety)
are dependent upon the material, thread and gasket used.
WIKA operating instructions, model MG-1
Process connection from stainless steel 316L and 13-8 PH
Sealing ring from FKM (if available)
Case from stainless steel 316L
Electrical connection from highly resistant, glass-fibre reinforced plastic PBT GF 30
with cable outlet
EN
13