Kenwood LZ-702IR Mode D'emploi page 5

IR Headphones audio setting
You can select the IR Headphones audio you wish.
Press the [MODE] button for at least 1 second.
Each time the button is pressed for at least 1
second, the audio input switches as follows:
Display Setting
"Normal" Sound with monitor source.
"AV-IN1" Select the AV1 INPUT source.
"AV-IN2" Select the AV2 INPUT source.
"Off" No output to IR Headphones.
• Turn off the headphones before changing the <IR
Headphones audio setting>.
Swithing the Display off mode
You can set the display off mode for the monitor.
Press the [V.SEL] button for at least 1 second.
Exit the Display off mode
Press any button.
Press the button other than the [2] and [3]
buttons.
Picture Quality setting
You can adjust the picture quality and Auto
dimmer control of the monitor.
1
Select the adjusting item
Press the [SCRN] button.
Each time the button is pressed, the adjusting
item switches.
On
Off
2
Adjusting the item
Press the [2] or [3] button.
Item Button Setting
"BRT" [3]
[2]
"TIN" [3]
[2]
"COL" [3]
[2]
"CONT" [3]
[2]
"BLK" [3]
[2]
Auto Dimmer
Item Button Setting
"Auto DIM" [3]
[2]
3
Exit Picture Quality setting mode
Press the [MODE] button.
• The "BRT" can be adjusted when "Auto DIM" is set to
"Off".
• The "TIN" can be adjusted when NTSC video signal is
input.
• The screen select can be set for each source.
• If you make no operation for 15 seconds, this mode
is automatically canceled.
Brighter screen
Darker screen
Stronger red level
Stronger green level
Deeper color
Paler color
Stronger contrast
Less contrast
Less black level
Stronger black level
The display doesn't dim.
When it gets dark, the
brightness of display lowers
automatically.
5
|
English