Kenwood LZ-702IR Mode D'emploi page 10

Installation
Installation for Monitor Unit
Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and
wiring work to professionals.
Before mounting the monitor to the headrest:
• Perform the required external connections first (Accessory 2).
• Using the supplied paper pattern (Accessory 5), mark the area to be cut out of the headrest, then carefully
cut it.
1. Connect Monitor and system cord (Accessory 2).
2. Install the monitor unit in the bracket (Accessory 4).
Paper template (Accessory 5)
Installation for Hideaway Unit
Use screws (Accessory 3) to fix Hideaway Unit onto an audio board or another.
Accessory 3
10
|
English
Headrest
Accessory 2
Installation plate (not supplied)
Accessory 2
Accessory 4
Monitor Unit
Screws (not supplied)