hager Tebis TX460 Manuel D'utilisation page 86

XP1_TX460_6T7269a.qxd
4.3 Buttons
I
Button MODE allows to select manually one of the following
set-point values:
- Confort
- Eco
- Reduced
- Forced comfort position
- Forced frost-free position
Set-point values of the Forced type
set-point values not cancelled by the next automatic
sequence.
I
Buttons + and – increases/decreases temperature set-point
value.
I
Button
cancel the current set-point.
Press this button to switch to Eco mode, Time Delay Comfort
mode or Comfort mode, from any other mode.
A second hit of this button restores the initial mode.
Note: depending on previous parameter set-up or the
mode currently defined:
• one or more buttons may be put OFF on a permanent
basis. In this case they are not displayed.
• one or more buttons may be put OFF on a temporary
basis. In this case hitting the button produces a beep
of error.
20/10/05
Presence/Absence allows to temporarily
82
13:44 Page 82
are priority