Configuration Knx/Eib - hager Tebis TX460 Manuel D'utilisation

XP1_TX460_6T7269a.qxd

2.2 Configuration KNX/EIB

The environment control and regulation can be configured
by:
➜
TX100: detailed description
• The link between the ther-
mostat and the output driver
must be carried out in mode
+ Info on TX100
➜
ETS: application software TX460.
• First configure environment control and regulation
EIB via TX100 or ETS software.
• Then carry out front face configuration.
20/10/05
can be found
User's Instructions
supplied with Configurer
Tebis.
77
13:44
in
Page 77
Installation