Labels - hager Tebis TX460 Manuel D'utilisation

XP1_TX460_6T7269a.qxd

9.1 Labels

This menu allows to indicate what function is associated
with each button in PB Control mode. This requires
associating a pictogram with each label.
I
Adding a label
When information has been entered in all labels, it is
necessary to Clear an existing label before a new label
can be added.
I
Selecting a label
Four labels are available (one per button).
Label 1 = upper section of the screen
Label 2 = right-hand section of the screen
Label 3 = lower section of the screen
Label 4 = left-hand section of the screen
20/10/05 13:45
• Select Add using button
.
• Press button
label.
• Select the label using buttons
.
and
• Press button
Then the screen displays a request for
entering a pictogram.
98
Page 98
and
to enter Select a
to confirm.