Additional Features; Random Button - Rotel RCD-12 Manuel D'utilisation

English
When accessing track numbers greater than 10, press the >10 button
followed by the track number. For example, to select track 12, press the
>10 button followed by the 1 button and then the 2 button.
The number of the selected track will appear in the main numeric area at
the center of the Display.
The DIRECT ACCESS buttons may also be used to memorize tracks in
PROGRAM mode (see below).
SEARCH Button
K
Remote Only
These buttons fast forward or fast reverse through the currently playing disc.
One press of these buttons will fast forward or fast reverse at 2X normal
speed. Press these buttons repeatedly will fast forward or fast reverse at
4X, then 8X, 16X, and 32X normal speed. One more press of these buttons,
or by pressing PLAY button returns the player to normal speed. While the
buttons are pressed, you will hear high-speed audio.

Additional Features

These convenience features add extra functionality to the RCD-12, including
the ability to memorize a group of tracks to be played, to repeat a disc,
program, or track over and over, to play the tracks on a disc in random
order, to automatically play the first 10 seconds of each track, and to select
from several available time displays.
PROGRAM Button
J
Remote Only
This button, labeled PROG, allows you to memorize as many as 20 tracks
on the current disc for playback in a specific order. For example, you could
instruct the RCD-12 to play track 5,followed by track 3, followed by track 8.
NOTE: Programmed play lists cannot be set up with MP3 and WMA
discs.
To begin a program:
1. Insert a disc into the slot loader. The RCD-12 will read the contents of
the disc.
2. Press the PROG button on the remote control. The PROGRAM indicator
will light up in the Display, along with "P-00" indicating that the unit is
waiting for the first track to be memorized.
3. Enter the first track number using the DIRECT ACCESS buttons. Your
selection will be memorized automatically and the Display indicator
will change to "P-01", indicating that one track has been memorized.
Continue entering the rest of your selections using the DIRECT ACCESS
buttons. Note that there is no need to press the PROG button as each
selection is memorized as it is entered.
Once you have memorized a play list, the RCD-12 remains in PROGRAM
mode until you eject the disc or press the STOP button twice in succession.
If you press the PLAY button, the memorized program will play instead of
the entire disc, starting with the first selection in the memorized list.
When a PROGRAM has been memorized, most functions that would normally
affect the entire disc operate on just the memorized program. For example,
the TRACK buttons advance to the next track in the memorized program,
not the next track on the disc. Likewise, the REPEAT button (see below)
continuously plays the memorized program, not the entire disc.
NOTE: The Random Play feature can not be used when using the
Programmed Play feature.
REVIEW Button
I
Remote Only
This button is used to review the memorized tracks in PROGRAM mode.
Press the button and the first memorized track number will appear in order
in the Display, for approximately five seconds. Pressing the REV button again
while the track number is displayed will continue the review sequence,
showing the next memorized track. Continue pressing the REV button to
see the complete memorized track list.
If you do not press the REV button while the track number is displayed, the
review process is terminated and the unit resumes whatever mode it was in
before you started to review.
Note that you may remove a selection from the play list during the review
procedure using the CLEAR button, as described below.
CLEAR Button
H
Remote Only
This button allows you to remove a track selection from the memorized
program play list during the review procedure described above. Follow the
review procedure until the desired track number is displayed. Then, instead
of pressing the REVIEW button to continue, remove the displayed track by
pressing the CLEAR button while the number is still showing. You may then
continue the review procedure.

RANDOM Button

D
Remote Only
This instructs the CD player to play tracks from the entire disc in random
order. Once all of the selections have been played once, the disc will stop
playing, unless the REPEAT Button (see below) has been engaged, in which
case the random play will continue until the STOP button is pressed. When
the RANDOM button is engaged, an
REPEAT Button
C
Remote Only
This button allows you to repeat the current track or the entire disc continuously
until the feature is cancelled by disengaging the REPEAT button or pressing
STOP. The REPEAT button steps sequentially through the available options.
Press the button once and the RCD-12 will repeat just the current track,
displaying the icon in the Display. Press the button a second time and
the RCD-12 will repeat the entire disc, displaying
the button a third time to cancel the REPEAT function.
As noted above, REPEAT can be used in conjunction with the RANDOM
play feature.
NOTE: The REPEAT function is automatically cancelled when the disc
is ejected.
9
icon will be displayed.
in the Display. Press