Yamaha Restio Mode D'emploi page 14

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE
Connecting an already-paired device via Bluetooth
Once pairing has been completed, connecting a Bluetooth will be easy the next time.
Connecting from this unit
Top panel
AUTO 2
1
DIMMER
USB
VOLUME SOURCE ALARM
1
Bluetooth indicator
Connecting from the connecting device
1
In the Bluetooth settings of the connecting device, turn Bluetooth on.
2
From the Bluetooth connection list of the connecting device, choose this unit (ISX-803 Yamaha/ISX-803D
Yamaha).
The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this unit will light.
Connecting with the NFC function
When using an already-paired smartphone with the NFC function, holding it over the NFC mark establishes a Bluetooth connection.
Note
Bluetooth connections cannot be established from the connecting device when this unit is in Eco Standby mode. Turn the system on.
Disconnecting a Bluetooth connection
If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth connection will be disconnected.
• Hold down the SOURCE button on this unit or Bluetooth on the remote control.
• Set the system to standby mode.
• Turn off the Bluetooth setting of the connecting device.
• Hold the smartphone with the NFC function over the NFC mark during Bluetooth connection.
12
En
SOURCE + BEEP
SET 2 BEEP
1 SOURCE
CLOCK ALARM TYPE
LABEL SIDE
SNOOZE SLEEP PRESET
1
Press the SOURCE button to switch the playback
source to Bluetooth.
Using the remote control
Press Bluetooth.
The Bluetooth indicator will blink on the front panel display;
this unit will search for the connecting device that was most
recently connected via Bluetooth, and will then establish a
connection (You must first turn on the Bluetooth setting of the
connecting device).
When the Bluetooth connection has been established, the
Bluetooth indicator will light.
Note
Yamaha does not guarantee all connections between this unit and
Bluetooth device.