Quick Guide; Using The Display - AEG IAE84853FB Notice D'utilisation

Symbol Comment
-
9
Pause
10
11
0 - 9 -
FlexiBridge
12

5. QUICK GUIDE

5.1 Using the display

• Only the backlit symbols can be used.
• To activate a given option, touch the
relevant symbol on the display.
• The selected function is activated when
you remove the finger from the display.
• To scroll the available options, use a
quick gesture or drag your finger across
the display. The speed of the gesture
determines how fast the screen moves.
• The scrolling can stop by itself or you can
stop it immediately if you touch the
display.
• You can change most of the parameters
shown on the display when you touch the
relevant symbols.
• To select the required function or time you
can scroll through the list and / or touch
the option you want to choose.
• When the hob is activated and some of
the symbols disappear from the display,
touch it again. All the symbols come back
on.
• For certain functions, when you start
them, a pop-up window with additional
information appears. To deactivate the
Menu
Assisted Cooking
Hob Functions
10 ENGLISH
The window of the Hob²Hood infrared signal communicator. Do
not cover it.
To activate and deactivate the function.
To show the current heat setting.
To switch between three modes of the function.
PowerSlide
Melting
pop-up window permanently, check
before you activate the function.
• Select a zone first to activate the timer
functions.
Symbols useful for display navigation
To confirm the selection or setting.
To go back / forwards one level in the Menu.
To scroll up / down the instructions on the
display.
To activate / deactivate the options.
To close the pop-up window.
To cancel a setting.
5.2 Menu structure
Touch to access and change the settings
of the hob or activate some functions. The
table shows the basic Menu structure.