Tascam DR-10C Mode D'emploi page 20

Menu item Summary
Format microSD
FORMAT SD
card
BATTERY TYPE Battery setting
Internal clock
setting
DATE/TIME
Year/month/
date/hour/
minute
SYSTEM INIT Initialize settings Sure? YES/NO
Shows the
VERSION INFO
firmware version
20
TASCAM DR-10C
Setting items
(default value Explanation
underlined)
Use this to format the microSD card in the unit.
Sure? YES/NO
YES: Start formatting the card. After formatting completes, the Menu Screen reappears.
NO: Return to the Menu Screen.
Use this to set the type of battery used.
This setting is used to show the amount of remaining battery charge and determine if the unit has enough power
for normal operation.
ALK/NiMH/LITH
ALK: Alkaline AAA battery
LITH: Lithium AAA battery
NiMH: Ni-MH AAA battery
"YY-MM-DD HH:MM"
1 2 3 4 5
1: YY (year), 2: MM (month), 3: DD (date), 4: HH (hour), 5: MM (minute)
YY-MM-DD
Press the 7'9 [ENTER] button to move the cursor from left to right: 1q2q3q4q5.
HH:MM
When the cursor is at 5 on the far right, press the 7'9 [ENTER] button to confirm the date and time and
return to the Menu Screen.
Use the . [j] and / [k] buttons to change the number at the cursor position.
Use this to restore the various unit settings (excluding MODEL SELECT) to their default settings.
YES: Initialize the settings. After initializing completes, the Menu Screen reappears.
NO: Return to the menu screen.
This is the firmware version used by the unit.
Vx.xx xxxx
When the version is being shown, press the 7'9 [ENTER] button to return to the Menu Screen.