Table des Matières
Publicité
14
English
Alternate installation
It is possible to install the beverage faucet without
the Zuvo filter.
Connect the white and red tubes using a ¼" OD
x ¼" OD tubing coupling (not included), suitable
for the water pressure of the installation. Install
the coupling according to the manufacturer's
instructions.
The beverage faucet is for use with
cold water only. Do not connect it
to the hot water supply.
To disconnect the tubes
If it is necessary to disconnect the tube from one of
the adapters:
Remove the clip.
Place the enclosed wrench flat against the lock
ring flange.
While pushing the flange with the wrench, pull
firmly on the tube.
Publicité
Table des Matières
