Sony MZ-B50 Mode D'emploi page 3

For customers in the USA and
Canada who have purchased the
optional AC power adaptor
Before using the optional AC power
adaptor, do the following procedure to
attach the large clamp filter to the AC
power cord. You must affix the ferrite
core to comply with Part 15 of FCC rules.
1 Open the clamp filter.
2
Wind the AC power cord into the clamp
filter as shown below.
Maximum length:
approx. 3 cm (1.2
inches)
3 Separate the loops by a space of
approximately 1 cm (0.4 inches) as
shown below.
4 Close the clamp filter.
Approx. 1 cm
(0.4 inches)
GB
Make sure the
clasps are fully
engaged.
3
-GB