Erasing Tracks; To Erase A Track; To Erase The Whole Disc - Sony MZ-B50 Mode D'emploi

Notes
• You cannot erase a track mark that has been
written between a track recorded in stereo and
a track recorded in monaural. If you try to
erase such a track mark, "SORRY" appears in
the display.
• You cannot erase a track mark that has been
written between a track recorded through a
digital connection and a track recorded
through an analog connection. If you try to
erase such a track mark, "SORRY" appears in
the display.

Erasing tracks

To erase a track

Note that once a recording has been
erased, you cannot retrieve it. Be sure to
verify the contents of the track you want
to erase.
1
While playing the track you want to
erase, press ERASE.
"Erase OK?" and "PushENTER"
appear alternately in the display and
the recorder plays the selected track
repeatedly.
2
Press EDIT/ENTER.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To cancel erasing, press xSTOP or
TRACK MARK.
28
-GB
EDIT/ENTER
ERASE
To erase a small section of a track
Pause playback at the point where you
want to start erasing. Then do steps 1 and
2.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part.

To erase the whole disc

Note that once a recording has been
erased, you cannot retrieve it. Be sure to
verify the contents of the disc you want to
erase.
EDIT/ENTER
xSTOP
1
Play the disc you want to erase, verify
its contents, and then press xSTOP.
2
While the recorder is stopped, press
ERASE.
"All Erase?" and "PushENTER"
appear alternately in the display.
3
Press EDIT/ENTER.
"TOC Edit" flashes in the display,
and all the tracks will be erased.
When erasing is complete,
"BLANKDISC" appears in the
display.
To cancel erasing, press xSTOP or
TRACK MARK.
ERASE