DoorBird D20 Série Manuel D'installation page 2

INSTALLATION MANUAL
You can always find the most up-to-date version of the installation manual at
www.doorbird.com/support
The installation of the Video Door Station to a wall or fence requires a skilled
professional and suitable tools e.g. drilling machine, drill, dowels and spacers
if necessary. These are not included.
COMPONENTS
Contents
∙ 1x DoorBird Video Door Station
∙ 1x Mounting housing / Mounting plate
∙ 1x Power supply unit (mains adaptor) with four country-specific adaptors
∙ External 2,4 GHz WiFi antenna
∙ 1x External 433 MHz RFID antenna
∙ 2x Antenna extension cable
∙ 1x Screw package with small parts and crimp connectors
∙ 1x Installation manual
∙ 1x Quick start guide
2
Video door station
front
Night vision
1
HDTV video
2
Loudspeaker
3
Motion sensor
4
Stainless-Steel
5
Button
Light sensor
6
Microphone
7
Nameplate
8
1) Night vision
Extra bright infra-red LEDs, effective
during the hours of darkness
(infra-red light invisible to the
human eye, 850 nm)
2) HDTV video
Ultra wide-angle hemispheric
lens, 180°
3) Loudspeaker
Large-sized and speech enhanced
broadband speaker
4) Motion sensor
180° Infrared motion sensor
for alarms
5) Stainless-Steel Button
With illuminated LED ring (at night),
also acts as Diagnostic-LED
VIDEOS
Need help with the installation? Be sure to watch our installation videos
which can be found on http://www.doorbird.com/support
Each individual step of the installation is clearly documented in the videos.
back
433 MHz
9
RFID antenna
2.4 GHz
10
WiFi antenna
433 2,4
thread
Mhz Ghz
11 Cable harness
6) Light sensor
For the night-vision mode
7) Microphone
With active noise cancellation
8) Nameplate
Illuminated (at night)
9) 433 MHz RFID antenna thread
To connect the external 433 MHz
RFID antenna
10) 2.4 GHz WiFi antenna thread
To connect the external
2.4 GHz WiFi antenna
11) Cable harness
For connection to the power
supply, network etc.
3