Installation Requirements - iRoom iDock Mode D'emploi

Masquer les pouces Voir aussi pour iDock:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Page 5

Installation Requirements:

The following products and tools are mandatory for proper installation:
• installed iRoom's flush-mounted box (mandatory)
operation without iRoom's flush-mounted box voids warranty!
• prepared wiring
• screwdriver
• wire stripper and cutter
• latest iOS App
IMPORTANT:
All installa tion work needs to be
executed by a qualified electrician
in accordance with national electrical
codes and regulations.
NOTE:
Wiring colours may be different from
the illustration. Be sure to verify the
wiring before continuing.
Electrical security:
An easily accessible, all-pole
disconnecting device is required in the
power supply circuit. Recommended
overcurrent protective device in the
mains power circuit: 6 A
Further documents regarding the product/installation/operation can be found under:
Connecting 110-240VAC
Connect the wires to the connector according to colour-code:
NOTICE
www.iroomsidock.com
cable colouring:
european standard
number
colour code
1
black
2
blue
3
yellow/green
This information is supplied without liability.
MANUAL
iRoom's iDock / miniDock
WARNING:
TO AVOID FIRE, SHOCK OR DEATH:
Turn off power at the circuit breaker
or fuse before installation.
CLEANING:
The product has a smooth and shiny
surface which is prone to scratches.
Handle with care.
iPad:
Please follow charging and operating
instructions of the iPad manufacturer.
us standard
designation
colour code
black
hot (L)
white
neutral (N)
green
ground (PE)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Minidock

Table des Matières