Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Page 5
Installation Requirements:
Following products and tools are mandatory for proper installation:
• installed iRoom's Backbox (mandatory)
operation without iRoom's Backbox voids warranty!
●
• prepared wiring
• Philips screwdriver PH2
• wire stripper and cutter
• Free App is required to configurate the iBezel
Default Codes for iRoom's iBezel:
Access Code
TouchCode PIN
please change Access Code & TouchCode PIN during installation and start-up
to avoid unauthorized iPad withdrawl.
IMPORTANT:
All installation works need to be
executed by a qualified electrician
in accordance with national
electrical codes and regulations.
NOTE:
Wiring colors may be different from
the illustration. Be sure to verify the
wiring before continuing
Electrical security:
An easily accessible, all-pole disconnecting device is required in the power supply circuit.
Recommended overcurrent protective device in the mains power circuit: 6 A
Further documents regarding the product/installation/operation can be found under:
:
iBezel
:
1234 and to confirm press the green LED
.
NOTICE
www.iroomsibezel.com
MANUAL
for iRoom's iBezel
WARNING:
TO AVOID FIRE, SHOCK OR DEATH:
Turn off power at the circuit breaker
or fuse before in stalling.
CLEANING:
The product has a smooth and shiny
surface which is prone to scratches.
Handle with care.
Publicité
Table des Matières
