Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
Operation:
• Touch & release the build-in sensor, called HomeButton (Fig. A), to open
the iRoom's iDock intake section.
• The iPad intake section remains in open position for 10 seconds, and
than
closes automatically.
• If there is a power loss, the iPad intake section opens automatically
All above mentioned and many more settings can be modified via our iOS App
„iRoom's iDock". Detailed descriptions can be found within the iOS App Help
Section.
If you have purchased a TouchCode or KeyCard model, please refer to the
specific descriptions included with the product.
Restoring the Default Configuration and Password:
You can restore factory defaults in two ways:
1. Use the „restore to factory settings" function of the iRoom's iDock iOS-App
• Access-Code is required
2. Use the Default Reset DIP Switch#1 on the rear panel of the router:
• Power off your iRoom's iDock
• Switch DIP#1 to ON
• Power on your iRoom's iDock and wait until LED is flashing quickly.
• Power off your iRoom's iDock
• Switch DIP#1 to OFF
• Restore process finished.
To locate the DIP Switch please refer to chapter „Main Board Feature Overview".
Basic Network Configuration:
To configure iRoom's iDock, access it via a docked iPad using the free iOS App
„iRoom's iDock".
Default IP
Default Access-Code
:
DHCP / 192.168.0.100
:
iBezel
Page 8
Publicité
Table des Matières
