Hornbach 6828262 Manuel D'installation Et De L'utilisateur page 175

Inserting the retractable screen
With the frame being supported
on all four corners you can start
the process of assembling and
installing the retractable
screen
Hang the screen to the frame
with the twin rod first. This is
essential for correct functioning
of the retractable screen once
installed correctly.
Attaching the retractable
Connect the retractable
screen to the already-
installed Z-brackets inside the
backside beam of the framing.
Use a M6x40 full thread bolt
and two Ø6 washers
M6 locking nut
Repeat the same for all Z-brack-
ets and ensure that the connec-
tions are tight.
8
.
9
screen
and a
.
ENGLISH | 175