Hornbach 6828262 Manuel D'installation Et De L'utilisateur page 171

Left and right beams
Attach the corner brackets (4 x)
to the ends of the left and
right beams of the pergola
awning. Be sure to face the side
of the beam featuring the open-
ing in the same direction as the
open ends of the corner brack-
ets . No screws or bolts are
required for this step.
Front and backside beams
Connect the right beam
the backside beam
lows (back to front): M6x8 bolt
, Ø6 washer , M6 washer
(plastic)
The frontside beam
connected to the right beam
by means of four M6x10 full
thread screws
Complete the framing structure
by repeating the above-men-
tioned process on the left side.
The frontside beam
connected to the left beam
by means of four M6x10 full
thread screws
1
2
to
as fol-
.
is to be
.
is to be
.
L
R
ENGLISH | 171