Operation And Use; Operation - Carlo De Giorgi 554/00 Manuel D'utilisation Et D'entretien

STERIL INTRAPLANT

4 - OPERATION AND USE

4.1 - OPERATION

Place the control unit on a surface near the operator in such a way that:
it is in a stable position with no risk of falling;
-
handpiece hoses are not subject to excessive traction, thus avoiding
-
the risk of breakage of internal lines or dragging of the power supply
unit;
- the functional status of the appliance can be checked easily.
With reference to figure 1, fit the micromotor supports into the lateral
bushings (1);
Connect the micromotor to the relative socket (2-3) by inserting the
connector and then twisting the lock ring without using excess force;
1
With reference to figure 2, connect the footswitch to socket (4) by
inserting the connector and tightening the lock ring.
Fit the flask stand in the bush (8) on the rear of the appliance and screw it
down, tightening the nut (with the supplied wrench) in the required
position; now suspend the plastic cradle containing the saline solution
flask.
Carlo de Giorgi
2
Fig. 1
3
1
GB - 5