Britax MULTI-TECH II Mode D'emploi page 31

5e
5f
IMPORTANT
ensure that the belt and
seat in position
If the belt buckle of your seat is not positioned correctly, try a
different seat position.
In case of doubt, contact Customer Service at
Tel.: +49 (0) 731-93 45-199
service.de@britax.com
www.britax-roemer.de.
Put your child in the child seat and apply the harness. Ensure that the harness
is not twisted. Tighten the harness by pulling the adjustment straps forward.
IMPORTANT
– The lap belt should be positioned as far forward and as low as
possible over the child's pelvis.
Finally, ensure that the chest pads are pulled down on your child's chest
(Fig. 5f).
– Check the position of the belt buckle and
NOT the buckle is holding the child
(Fig. 5e).
or by e-mail to
or visit
9-18 kg