Bt Go Main Functionality; Basic Functionalities - Midland BT GO Guide D'utilisation

BT GO main functionality

Midland BT GO is a full duplex intercom communication
system for Driver to Passenger and Bike to Bike
communication with a maximum distance of 200 mt
(depending on terrain conditions).
In addition you can listen to Stereo music, place and
answer to phone calls or receive voice street indications
from the GPS.
If, during intercom communication you receive a
phone call, the intercom is closed and reopens as soon
as the phone call is over.
If, while you are listening to music , the intercom
communication is open, the music will be paused.
When the intercom is closed, the music is automatically
resumed.
If, while you are listening to music , a phone call arrives,
the music is paused. When the phone call is closed, the
music is automatically resumed.
ATTENTION: Midland BT GO automatically answers to
an incoming phone call after 8 sec. You can disable this
feature and manually answer to the incoming calls.
Enable auto answer
Vol+ for 7 sec (LED light: full blue 1 sec)
16
Disable auto answer
Vol+ for 7 sec (LED light blink blue 3 time)

Basic Functionalities

Turn ON Vol+ and Vol- for 1 sec
Voice prompt: "Power on"
and "battery status"
Turn OFF Vol+ and Vol- for 1 sec
Voice prompt: "Power off"
Volume adjustment Vol+ or Vol - for 1 sec or keep
pressed
Pairing to a phone/GPS
Start pairing on BT Unit is off
GO Vol+ for 5 sec
Red and Blue LED blink
alternate
Voice:
starts, "PAIRING successful"
when finishes
Start pairing on Searches
Bluetooth devices device and select "Midland
(phone/GPS/MP3) BT GO" from the list
PIN (if requested) "0000"
"PAIRING" when
for Bluetooth
midlandeurope.com