YT Industries Decoy 29 Mode D'emploi page 45

F O RK ST OP
Test that the forks stops are working in
8.
both directions. No contact between the
fork and the frame should be possible. The
fork stops are there to prevent damage to
the frame in case of a crash.
S US PENSION ELEMENT
Air sprung forks and shocks must abso-
9.
lutely be adjusted to the correct air pres-
sure before use. For that reason we have
included a shock pump with your new YT
bike. You can learn about adjusting your
suspension's air pressure in the manufac-
turer's manual.
Basic Settings
The weight of the rider and his position
on the bicycle determine the adjustment
criteria for the rear shock and suspension
fork. When sitting on the bike, the suspen-
sion will compress to a certain degree –
the so-called "sag". Sag should be between
25 – 30 % for Enduro bikes. The "sag value"
that corresponds to your riding style is best
determined with a few test rides. Test rides
and personal preferences will also determi-
ne the settings of the compression and re-
bound speeds of the suspension elements.
ATTENTION! Do not ride your bike
with too little or too much air pressu-
re, as this may lead to fork or shock
damage.
You'll find more precise instructions in
the included manufacturer' s manual.
y t 4 5