YT Industries Decoy 29 Mode D'emploi page 43

Place the front wheel in the fork. Take care
5.2.1
when inserting the brake rotor in the caliper
to avoid causing damage. Lightly grease the
front axle.
FRONT WHEEL ASSEMBLY
FOX 36 / ROC KSH OX YARI
On FOX forks, the axle should be inserted
5.2.2
from the non-drive side, whereas on RockSh-
ox forks it should be inserted from the drive
side. Insert the lightly greased axle as far as
it will go, then secure it by rotating it in the
clockwise direction.
Tighten the axle by hand until it sits parallel to
5.2.3
the fork, in order to properly secure the wheel.
The axle is delivered already adjusted. Once
the lever is tight and parallel to the stanchion,
the wheel is secure. Please also observe the
manufacturer's advice!
Please do not inflate the tires beyond
TIP!
the maximum pressure as indicated on the
tire. The optimal tire pressure depends on
the rider's weight, the terrain, and personal
preferences. If you have further questions
please contact our customer service:
service@yt-industries.com.
Too low tire pressure leads to:
• lack of control
• risk of damage to tires, tubes, and rims
• sudden tire pressure loss
Too high tire pressure leads to:
• significantly less grip
• lack of comfort
• sudden tire pressure loss
y t 4 3