Installation; General - Atag OX9570G Mode D'emploi

INSTALLATION

General

This appliance may only be installed by an authorised mechanic! The
electrical connection must comply with national and local regulations.
Warning!
The appliance should be earthed at all times.
Installation, maintenance and repairs may only be implemented by
mechanics who are authorised by the manufacturer for this purpose, as
otherwise the warranty will be cancelled.
The appliance should be insulated electrically for installation,
maintenance or repairs. The appliance is electrically insulated when:
• the main switch of the domestic electrical system is switched off, or
• the fuse of the relevant electrical group has been removed
completely, or
• the plug of the appliance has been removed from the plug socket.
Only replace faulty parts with original ATAG parts. ATAG guarantees
compliance with the safety regulations for those parts alone.
To prevent hazardous situations caused by damaging the electric lead,
the lead can only be replaced by the manufacturer, the manufacturer's
service organisation or a certified expert.
Unpacking
Remove all protective materials. Check the type plate to see if the
appliance is compatible with your electricity network.
EN 17